Each of us sometimes wakes up a littleShrew, who wants to blow something up. For such purposes firecrackers are best suited. Most people buy them, but it turns out that it's enough to make them yourself. How to make a firecracker? It turns out that it's very simple and affordable for any person.

Necessary materials

For our purposes we will need:

1. Pliers.
2. Blunt nail.
3. Wire.
4. Paper.
5. Telescopic antenna.
6. Eraser.

First step

Before you make a firecracker, you need to prepareall the above materials. If this is done, it turns out that the self-made manufacture of firecrackers is not such a difficult task. First, you need to break off from the telescopic antenna a small piece - about 3-6 centimeters. After this simple procedure, it is necessary to bend the antenna two times, and on the reverse side you need to wrap it up so that you can put something in the resulting tube.

Second step

After completing all the procedures specified in thethe first step, you need to do a number of operations in order to make a handshake with your own hands. It is necessary to cut off a fairly small piece from the eraser (gum) taken with scissors. After this, you must put this piece in the tube, necessarily up to the very end, which was bent.

Third step

The basis for the firecracker is done. Now you need to get the pliers and crush the head of the match from the sulfur, collecting the powder on paper. So you need to scrape off all the sulfur heads from the box, because for the firecrackers need a lot of sulfur. Then it is necessary to crush the resulting mass - and the filling for the petard is ready. As you can see, indeed, the answer to the question of how to make a firecracker will be as follows: "It's easy!".

The fourth step

Next, you need to bend a piece of paper with sulfur in halfand fill the tube with the resulting sulfur powder. Next, some advise to take a fairly thick wire and "bite" it with cutting pliers first vertically, and then horizontally at a small distance from each "bite". As a result, you will get an additional charge from the tiny iron pieces, which you need to fall asleep together with sulfur in the tube. However, this advice can hardly be called reasonable, because when launching such a firecracker on New Year's holidays or on another solemn day, you can not only seriously injure yourself, but also endanger the surrounding. Therefore, it is better to skip this stage.

Fifth step

With the help of the previously taken stupid nailTo kill the charge of firecrackers (either just sulfur, or sulfur with iron impregnations). Just put the nail and start ramming. The main thing is to do it well, otherwise the explosion from the firecracker will be weak, without quite loud and expected sound effects. If it is good to compact, then you can blow up the firecracker even without sealing the "package". After ramming the sulfur, we again need to cut off the piece of eraser and close the tube in the same way as from the previous side - so we did in the beginning of the conversation about how to make a firecracker.

Last step

It is necessary to roll a firecracker into a bag that will remain on fire. Do not forget to move to a safe distance so as not to damage your health!